geordan
junior member
Member #
Joined: 05 Aug 2000
Posts: 7
Location: Veyo, Utah U.S.A
|
 Posted: Thu May 10, 2001 5:07 pm |
 |
 |
My graphire jitters all over the place. In Win2k and Linux so I'm assuming it has to do w/the monitor frequency and whatnot. I've tried various frequencies from 70-90hz while holding the tablet as far away from the monitor as possible, to no avail. Any ideas on how I can fix this problem? Maybe if I wrap the cord in electrical tape to block out the waves. 
Any ideas appreciated.
-geordan |
|
waylon
member
Member #
Joined: 05 Jul 2000
Posts: 762
Location: Milwaukee, WI US
|
| Posted: Thu May 10, 2001 7:37 pm |
|
|
Hi. I had the same problem, and adjusting the refresh rate fixed it for me... so this is just conjecture. I don't know if the problem is that the monitor's interfering with the cable, or the tablet itself. If your monitor and computer are close together, you may want to push them away from each other a bit, and make sure the cable runs nowhere near the monitor. Though I'm pretty sure the problem is between the monitor and the tablet itself.
Uhm. You could also try running at a different resolution, and changing the refresh rates. That might make a difference too. |
|
